*Although this is a fully functional automotive shopping cart software system, River's Edge, Inc. and Expert Data Solutions do not sell these products. These products are listed for demonstration purposes only.*
|
_ShowItem_Top.htm
Get your truck up that trail with our ready-to-install Auburn Differentials! These differentials are limited slip when not engaged. Press the switch and they are fully locked and ready for the toughest obstacles!
Kit includes remanufactured differential, set up with an Auburn ECTED locker, all of the necessary wiring and switches, and Auburn Limited Slip Additive.
SAX 1 Year/Unlimited Mileage Limited Warranty. Auburn ECTED unit is warrantied by Auburn Gear.
Core Charge is refundable upon return of your old unit. Core returns of a different ratio are subject to a reduction in core credit. See our Core Policy for additional details.
SPECIAL WARRANTY INSTRUCTIONS FOR
DIFFERENTIAL ASSEMBLIES
In order to ensure that the warranty on your differential assembly is safe, please adhere to the following:
1. Do not remove the pinion yoke. The torque on the yoke is set to a specific preload range for the pinion bearings. Removing the yoke can severely impact this setting and cause premature bearing failure and potential damage to the ring and pinion gears. We will not warranty any units that have had the yoke removed.
2. Make sure that the vent line is properly attached to the differential. Loose or unattached vent lines can cause water intrusion as well as seal leaks. Units with evidence of water intrusion are not covered by warranty.
3. If your unit is equipped with an aftermarket locker, be sure to read and follow the pertinent instructions for installation, testing, and operation in the included manual from the manufacturer.
4. Use only factory recommended fluids in the unit and change it at the proper intervals. *Units with the Auburn ECTED locker installed should use only non-synthetic gear oil and one of the following friction additives: Ford p/n C8A219B546A or GM p/n 1052358*
5. After the first 500 miles from installation, it is necessary to change the fluid in the unit. It is not unusual to see more than the normal amount of small metallic particles on the drain plug magnet at this time, especially on units with an aftermarket locker installed. This is from break in. Large particles are not normal and could indicate a problem.
| Make | Model | Engine Type | Liter | Years | Fuel | CID | Fuel Delivery |
| AM General | Hummer H1 | V8 | | 1992 - 2004 | DIESEL | | FI |
*Although this is a fully functional automotive shopping cart software system, River's Edge, Inc. and Expert Data Solutions do not sell these products. These products are listed for demonstration purposes only.*
|
*Although this is a fully functional automotive shopping cart software system, River's Edge, Inc. and Expert Data Solutions do not sell these products. These products are listed for demonstration purposes only.*
|
Price: $0.50
|
|
Price: $0.00
|
|
Price: $0.00
|
|
Price: $0.00
|
| The Show Item page allows the Auto PlusXP user to manage and display data from the inventory control system for category, sub category, sku number, part number, manufacture, product name, short description and price. In addition, long description content as well as two unlimited note fields from the accounting inventory control system are displayed if available. If a particular item has recommended items or similar/alternate products, these are listed on the show item page. Vehicle applications are displayed at the bottom of the page if applicable. Thumbnail product images come from the inventory control system and are uploaded along with all data. |
|